- Related Products
MX Wall Plate Fixing Kit HLX
The wall plate fixing kit is specifically designed to make the installation of Inline and Bar Mixer valves simple and secure.
1 Year Guarantee
Make easy work of fitting a bar mixer shower with this handy fixing plate
Quickly install accurate pipework for a firmly fitted shower
Firmly clamps 15mm pipework accurately in place at 150mm centres, Comes complete with screws and brass fittings to connect to pipework and bar shower mixers
Fitting Insructions for Wallplate
Identify all components before fitting and determine which valve is being fitted and the configuration needed.
The wall plate will fit valves requiring 150mm or 46mm centres between fittings.
The supply pipework can be plumbed from above, below or from either side but must finish at the suitable connections, which should be positions ‘A’ (150mm) or positions ‘B’ (46mm) depending upon the valve being fitting.
Fit elbows to back plate in positions A or B depending upon the type of valve being fitted, making sure the hot piping supply is to the correct position for the valve you are using.
Write an online review and share your thoughts with other shoppers!